Welltec in Malaysia

Welltec's solutions are developed to provide the oil and gas industry with competitive well solutions and range from well completion solutions to subsequent well intervention and maintenance, which ensure optimal performance.

All solutions are based on the groundbreaking tractor technology, which has formed the company. Our motivation has always been an urge to challenge existing practices and devise new and better methods for development and management of oil and gas reserves.

This urge governs our mission. Our mission is to develop and deliver solutions which enable our clients to optimize the value of their oil and gas reserves by minimizing reservoir uncertainties and maximizing flexibility.

The core of our philosophy is to challenge, pursue and develop the optimal solutions based on their premises and our expertise.

Embedded in the philosophy is a continuous effort to promote clean technology and advance ongoing efforts to enhance personnel safety and health while reducing their environmental risks, fuel consumption and carbon footprints.

Our range of well completion solutions offer a number of competitive solutions which enable wells to come on stream faster. These are supplemented with our wide range of intervention solutions spanning from well logging and surveillance measurements to complex cleanout and maintenance operations.

source

Kuala Lumpur Welltec Oilfield Services Sdn. Bhd. (Malaysia) B-3-8, Block-B, Megan Avenue 1 No 189, Jalan Tun Razak 50400 Kuala Lumpur Malaysia Phones: +603 2171 1949/              +603 2171 1415/              +603 2171 1915 Fax:       +603 2171 1615 Contact Person: Ramlan Hamzah rhamzah@welltec.com

Labuan Welltec Oilfield Services (Malaysia) Labuan Operation Base Lot No 27, Lusu Warehouse Jalan Patau-Patau Post Code: 87000 Federal Territory Labuan Malaysia Phone:  +60 87 422318/             +60 87 421317 Fax:      +60 87 421316 Contact Person: Ramlan Hamzah rhamzah@welltec.com

Kemaman Welltec Oilfield Services (Malaysia) Warehouse No. 14 Kemaman Supply Base 24007 Kemaman Terengganu Malaysia Contact Person: Ramlan Hamzah rhamzah@welltec.com

SARAWAK OIL & GAS EXPO (SOGEX) 2013, MIRI

The 2nd Sarawak Oil & Gas Expo 2013, known as SOGEX 2013, will be held on 20-22 August 2013 at the Miri Indoor Stadium, Sarawak, Malaysia. In the past report it has broken records and become Sarawak's Largest Oil and Gas Exhibition, with over 100 exhibitors from 10 countries. More than 5,000 industry professionals to address the strategic, operational and technology aspects of the Sarawak oil and gas industry. In additional to the exhibition and there will also be a high powered conference presented by high profile speakers, and a variety of networking opportunities.

Visit http://www.oilgasexpo.com/  for more info

history of Cetco Energy Services

We provide comprehensive solutions for a host of oilfield, petrochemical and refining needs. Our services are holistic in approach to give our clients the most comprehensive and knowledgeable service possible. We invite you to explore our products and services and let us know what we can do for your business.
Cetco Energy Services began in 1996 as CETCO Offshore, a division of ColloidEnvironmental Technologies Company. Our fluid treatment technology was first introduced in 1996 in the Gulf of Mexico for treatment of fluids from acid stimulation flow backs and well completions.
In 2003, CETCO Offshore became a separately incorporated entity of Amcol International (NYSE: ACO) and took the name CETCO Oilfield Services Company. The company has grown significantly, both through internal growth and acquisitions. The addition of services has grown out of the needs of our customers, and spurred by our company’s desire to link complementary technologies and processes. With this growth, a brand update became essential to allow our customers to better understand our offerings. In 2013, we took the name Cetco Energy Services.
Today Cetco Energy Services is a wholly-owned subsidiary of Amcol International. We operate out of 25+ locations worldwide and employ over 800 people.
source

History of Halliburton

Founded in 1919, Halliburton is one of the world's largest providers of products and services to the oil and gas industry. It employs more than 75,000 people, representing 140 nationalities in approximately 80 countries.

Halliburton's fascinating and proud history reveals a continuous focus on innovation and expansion that began with the company's founder, Erle P. Halliburton. After borrowing a wagon, a team of mules and a pump, he built a wooden mixing box and started an oil well cementing business in Duncan, Oklahoma.

In the 1930s, Halliburton established its first research laboratories where the company tested cement mixes, began offering acidizing services to break down the resistance of limestone formations and increase the production of oil and gas, and performed its first offshore cementing job using a barge-mounted cementing unit at a rig in the Creole Field in the Gulf of Mexico. This was the beginning of what was to become the world's most extensive offshore service.

Halliburton took the initial steps toward becoming a worldwide company in 1926. We sold five cementing units to an English company in Burma, the start of our Eastern Hemisphere operations, and Erle P. Halliburton sent his brothers to open our business in Alberta, Canada. We opened in Venezuela in 1940. By 1946, the company – using its innovative technology – had expanded into Colombia, Ecuador, Peru and the Middle East and began performing services for the Arabian-American Oil Company, the forerunner of Saudi Aramco.

In 1951, Halliburton made its first appearance in Europe as Halliburton Italiana SpA., a wholly owned subsidiary in Italy. In the next seven years, Halliburton launched Halliburton Company Germany GmbH, set up operations in Argentina and established a subsidiary in England.

In 1984, Halliburton provided all of the well completion equipment for the first multiwell platform offshore China. Two years later, Halliburton became the first American company to perform an oilfield service job on the China mainland

The final decade of the 20th century brought more changes and growth to Halliburton. The company opened a branch office in Moscow in 1991.

The company realigned its work into Eastern and Western Hemisphere operations in 2006, and in 2007, divided its service offerings into two divisions: Completion and Production, and Drilling and Evaluation.

Today, Halliburton offers the world's broadest array of products, services and integrated solutions for oil and gas exploration, development and production.

source

Vacancy in Aker Solution Subsea in Klang

Aker Solutions provides oilfield products, systems and services for customers in the oil and gas industry worldwide. The company’s knowledge and technologies span from reservoir to production and through the life of a field. Aker Solutions employs approximately 28 000 people in more than 30 countries. In 2012, Aker Solutions had aggregated annual revenues of approximately NOK 45 billion. We offer great opportunities for current and future employees.

We are seeking highly committed and competent individuals to work at the world’s largest subsea manufacturing facility in Port Klang in the following roles. Be part of our growth and expansion plans as we have recently secured and been awarded new projects both regionally and internationally.

Permanent positions:
- Technician
- CNC Machinist
- IQC Inspector
- QC Inspector
- Calibration Assistant
- Warehouse Assistant
- Welder
- Buyer
- Change Controller
- CNC Service Engineer
- Controls MSC Software Engineer
- Cost Estimator
- Manufacturing Design Engineer
- CMM Operator
- Material Planner
- PEM Engineer
- Process Engineer
- Project Planner
- Quality Engineer
- Senior Project Risk Specialist
- SPS Commercial Lead
- Manufacturing Engineer
- Senior Accountant
- Machine Shop Manager
- Senior Design Engineer/Design Engineer
- Designer
- Support Engineer
- Senior Lead Engineer – Controls
- Lead Engineer – XMT

Contract positions:
- Fitter/Semi Skill
- Rigger

Interested candidates are invited to write-in/email/fax to:

Human Resources Manager
Aker Solutions Malaysia Sdn Bhd (716944-A)
Jalan FZ3-P2/KS 12, Persiaran Port Klang FZ4
42920 Pulau lndah, Selangor, Malaysia
Email: Please Login or Register to apply this job online.
Fax: 603-3169 8304
Apply online through the company’s website at www.akersolutions.com/career
(for white collar positions)
Closing date: 31 August 2013

GE Singapore Graduate Engineer - Subsea Trees

   Apply at GE official website here

https://xjobs.brassring.com/tgwebhost/jobdetails.aspx?partnerid=54&siteid=5346&jobid=1099265

Job Description

Role Summary/Purpose	The Subsea Graduate Design Engineer is a competent individual capable of undertaking design, validation & verification activities on Oil & Gas equipment typically pressure containing and/or load bearing in nature, meeting internal & external engineering competence standards as defined further in this document. The position of engineer may typically work under the guidance of a Lead Engineer within a team environment.
Essential Responsibilities	Interpret customer specifications to produce design specifications  Develop conceptual design requirements for customer  Identify and ensure equipment is designed in accordance with the current Health, Safety and Environmental legislation.  Identify improvements in existing products, procedures and processes and develop cost effective solutions to satisfy specifications.  Communicate design specifications for interpretation by designers.  Contribute to design reviews including materials and environmental reviews  Prepare preliminary materials lists based upon the above  Prepare & review Bill of Materials (BOM) in Product Information Management System (PIMS) database  Ensure all engineering activities and documents are correctly archived in PIMS. Maintains a clean and safe working environment  Prepare & review design verification activities, which may include but not limited to: risk analysis, failure analysis, design reviews, calculations to establish a full Design Verification Package (DVP).  Prepare & review installation procedures such as Factory Acceptance Test (FAT), Field Installation procedures,  Prepare and/or review drawings and calculations undertaken by designers & peers in support of design.  Liase with manufacturing to ensure designs are suitable and allow for efficient manufacture.  Contribute to operational field support as required.  Contribute to shop floor and vendor queries as required including non-conformance disposition
Qualifications/Requirements	Degree in Mechanical Engineering.  Minimum of 0 years experience preferably 2 years of post graduate industrial experience.  Awareness of Health, Safety and Environmental regulatory requirements for this industry.  Awareness of drafting standards and international codes  Awareness of materials, including welding and heat treatment of metals and elastomers.  Awareness of industry standards and codes for area of work.  Awareness of design process methodologies.

Cameron Subang Intership for Petroleum and Mechanical Engineering student

Internship opportunity with oil n gas company - CAMERON - preferably Petroleum Engineering and Mechanical -  Email your CV to camsbjhr@c-a-m.com